Air Gap
Air Gapsstormwater backflow – and mosquitoes – entering your tank
through your outlet pipes.
Includes two removable insect proof screens for easy cleaning.
Product Overview
Prevent stormwater contamination
By creating a physical air break in your tank overflow outlet pipe, the Air Gap stops stormwater surges from back-flowing into your tank and contaminating your rainwater.
Keep mosquitoes out
With dual, mosquito-proof 955 micron stainless steel screens, the Air Gap also protects the rainwater in your tank against contamination from mosquitoes and larger insects and animals.
Install and clean with ease
The Air Gap includes two removable mosquito-proof screens for easy maintenance and a raised lower lip on the air gap opening to minimise splashing.
Air Gaps Secure your System by providing a barrier to mosquitoes and other insect pests trying to enter your system through your tank outlet. Additionally, they prevent stormwater back flow into your tank during flooding events to ensure your water doesn’t get contaminated.
Learn more about the 4 Pillars of Designing a Rain Harvesting System.
The Rain Harvesting steps addressed:
 |
Limit sources of contamination |
 |
Plan for volume |
 |
Filter leaves and debris |
 |
Divert the first flush |
 |
Secure the system |
 |
Manage standing water |
 |
Consider a safety net |
 |
Monitor and maintain |
Installation
Cleaning and Maintenance
Installation Guide
-
Specifications
-
What's in the box?
- Air Gap
-
Tools/materials you may require
- Marker pen
- Tape measure
- Saw
- Solvent weld glue
-
Reference Chart
-
Installation
- Select an installation point for your Air Gap. This must be a vertical section of pipe after your tank overflow.
- There is 3 parts to your Air Gap (2 x insect proof screens and 1 x main body). Please remove the insect proof screens, then use solvent weld glue to glue the bodies into either end of the main body of the Air Gap.
- Remove a 220mm section of pipe at your desired installation point. The Air Gap assembly incorporates two 100mm female sockets that glue directly to 100mm pipe. Ensure all cut edges are clean and smooth.
- Orient your Air Gap so it is the right way up as shown in the diagram on the right.
The mouth of the Air Gap catches the water flowing from the tank. - Apply solvent weld glue to inside the sockets of the Air Gap and also outside of each pipe.
- Fit the Air Gap into position and insert both pipes into the sockets and hold until glue sets.
-
Maintenance
Remove the insect proof screens by pulling the handle and clean off any build up of debris.
-
Product FAQs
How does backflow occur, and how does an air gap help?
In an extreme rainfall event there is the possiblity that water can back up through the stormwater overflow pipe and towards the rainwater tank.
If your local stormwater infrastructure (beyond your property boundary) becomes blocked, the system can “charge”, causing dirty stormwater to surge back through your stormwater pipework. If your rainwater tank overflow is connected to stormwater, this “charged” stormwater can backup into the tank.
If the pipes connected to the overflow of the rainwater tank are crushed, excess water from any pipework connected to the same system could flow back towards the tank, taking with them whatever debris is in the system.
If your tank is going to a soakage pit, in an extreme rain event the pit could become saturated and water can flow back up towards the
An air gap prevents this problem by creating a physical gap between your rainwater tank and stormwater lines. With an air gap, overflowing stormwater is prevented from backing up into your tank. Instead, it will spill out through the front of your air gap.
My screens keep falling out. What should I do?
Check that the oring is present on the screen and in position. This will ensure a secure fitment.
Should I install my air gap at the top or bottom of the overflow?
You can install your air gap at the top or bottom of the vertical overflow pipe. Installing your air gap closer to the top of the overflow will generally make it easier to maintain.
We recommend ensuring you don’t have a charged line which could effect the height of installation.
The overflowing water from my tank is spilling out the front of my air gap. How can I fix this problem?
Overflowing rainwater from your tank can begin leaking from the air gap if the bottom screen becomes dirty or obstructed. To prevent this problem, regularly check and clean your bottom screen.
